| |
|
| DD 30 SPECIFICATIONS |
| GENERAL EQUIPMENT SPECIFICATIONS |
| |
| Dimensions: |
Depth 36",width 40.5",Height 100" |
| Compaction Force : |
39,300 lbs. |
| Ram face dimension: |
29"W * 29"D. |
| Ram face pressure : |
46.7 psi |
| Cycle time : |
28 sec |
| Baler meets or exceeds ANSI Z245.5 safety standards. |
| Baler uses readily available,nationally and internationally distributed components. |
| Baler is assembled from atleast 95% American made components. |
| Machine weight : |
1800 lbs |
| |
| RESULTS |
| 6 to 1 compaction ratio |
| |
| CONSTRUCTION SPECIFICATION |
| Floor : |
1/4" steel plate , 4" channel |
| Sides : |
1/4" steel plate,(4)3/8"x 3"side stiffners per side |
| Back : |
6" channel,6" tube |
| Door : |
3/16" plate , 4" * 3" * 3/16" tubing |
| Cylinder mounting : |
4" heavy channel,1" steel plate |
| Presshead : |
1/4 steel plate |
| |
| HYDRAULIC SYSTEM SPECIFICATION |
| Pump (type) : |
Rotatory vane positive displacement |
| (capacity) : |
10.5 gpm |
| System Pressure (normal) : |
2000 psi |
| (max) : |
2400 psi |
| System Design Pressure : |
2500 psi |
| Cylinder (bore) : |
5" |
| (stroke) : |
34" |
| (rod) : |
3" |
| Reservoir capacity: |
22 gal |
| The system is completely self-contained within the baler.The power unit has the following feature: 20 micron filering System,soft shift directional valve and oil heater port. |
| |
| ELECTRICAL SYSTEM SPECIFICATION |
| molor (hp) : |
1750 |
| (rpm) : |
1750 |
| (voltage) : |
208/230/480 VAC 60Hz Three phase |
| (voltage) : |
230 VAC 60hz single phase (optional) |
| Electric Panel (main) : |
Hoffman NCMA 4 |
| (junction) : |
Hoffman NEMA 3R |
| Looms (motor) : |
3/4" satellite with 8 TFFN wire(note all looms are grounded) |
| (main) : |
Multi - conductor cord (color coded) |
| (power unit) : |
Multi - conductor cord (color coded) |
| Motor starter : |
IEC size 2 |
| Controls : |
Relay Logic |
| Operators (type) : |
Alllen Bradley 800E series(20mm) |
| (Used) : |
Keyed start switch |
| |
Red mushroom stop push button |
| Interlock switches |
Mag Switch |
| |
| PAINT SPECIFICATION |
| Primer : |
Rush inhibiting ballom coat,2mil thickness. |
| Paint : |
Industrial enamel,high solids, 4mil thickness. |
Sitemap... click here
For
further compactor, baler, and drum crusher information, please call or fax us at the numbers below.
