Industrial Balers
check box Sitemap... click here
check box Multi-bin baler output
samples. click here
Toll Free: 1-888-81-WASTE
Phone: (847) 382-0766
Fax: (847) 382-8913

High Density Downstroke Baler - Compactor

DP-18 Specifications
DP 18 with new side mounted power unit        High-Density-Downstroke-Baler
High Density Downstroke Baler - Compactor
Click here to view drawing of ourNEWhigh density downstoke baler with side mounted power unit


GENERAL EQUIPMENT SPECIFICATIONS
Dimensions Depth  27" Width 29" Height 92" (top of cylinder)
Compaction force (normal) 25,200lbs
Compaction force (max) 30,150lbs
Ram face dimension 18"W x 17"D
Ram face pressure (normal) 78 psi
Ram face pressure (max) 94psi
Cycle time (unloaded) 39 sec
Unit weight 1050 lbs
Baler meets or exceeds ANSI Z245.5 safety standards.
Baler uses readily available, nationally and internationally distributed components.
Baler is assembled from at least 95% American made components.


BALE SPECIFICATIONS
Bale size 18"D x 18"H x 18"W
Bale weights 50 to 75 lbs - OCC
50 lbs - P.E.T
60 lbs - HDPE
50 lbs - ALUMINUM
75 lbs - PAPER


HYDRAULIC SYSTEM SPECIFICATION
Motor            (hp)
                      (rpm)
                      (voltage)
1.5 hp
3450
208/230/480 VAC 60Hz Three phase (220 volt single phase is optional)
Pump            (type) Hi-Lo positive displacement gear pump.
System pressure (normal)
                                 (max)
2000 psi
2400 psi
System design pressure 2500 psi
Cylinder        (bore)
                      (stroke)
                      (rod)
4"
34"
2 1/2"

         The system is completely self-contained within the baler. The power unit has the following features: 20 micron filtering
     system, soft shift directional valve, and oil heater port


PAINT SPECIFICATIONS
Primer Rust inhibiting bottom coat, 2 mil thickness
Paint Industrial enamel, high solids, 4 mil thickness

For further compactor, baler, and drum crusher information, please call or fax us at the numbers below.
FREE Quotes! Click here