Industrial Balers
check box Sitemap... click here
check box Multi-bin baler output
samples. click here
Toll Free: 1-888-81-WASTE
Phone: (847) 382-0766
Fax: (847) 382-8913

High Density Downstroke Baler - Compactor

DP-36 Specifications
DP 18 with new side mounted power unit        High-Density-Downstroke-Baler
High Density Downstroke Baler - Compactor
Click here to view drawing of ourNEWhigh density downstoke baler with side mounted power unit


GENERAL EQUIPMENT SPECIFICATIONS
Dimensions Depth  35" Width 48" Height 107"  (top of cylinder)
Compaction force (normal) 39,200lbs
Compaction force (max) 47,124lbs
Ram face dimension 36"W x 24"D
Ram face pressure (normal) 45 psi
Ram face pressure (max) 55 psi
Cycle time 40 sec
Unit weight 1575 lbs
Baler meets or exceeds ANSI Z245.5 safety standards.
Baler uses readily available, nationally and internationally distributed components.
Baler is assembled from at least 95% American made components.


BALE SPECIFICATIONS
Bale size 24"D x 20"H x 36"W
Bale weights 250 to 350 lbs - OCC
250 lbs - P.E.T
255 lbs - HDPE
245 lbs - ALUMINUM
270 lbs - PAPER


HYDRAULIC SYSTEM SPECIFICATION
Motor            (hp)
                      (rpm)
                      (voltage)
5
1750
208/230/480 VAC 60Hz Three phase (220 volt single phase is optional)
Pump            (type) Rotary vane positive displacement
System pressure (normal)
                                 (max)
2000 psi
2400 psi
System design pressure 2500 psi
Cylinder        (bore)
                      (stroke)
                      (rod)
5"
34"
3"

         The system is completely self contained within the baler. The power unit has the following features: 20 micron filtering system, soft shift
    directional valve, and oil heater port.


PAINT SPECIFICATIONS
Primer Rust inhibiting bottom coat, 2 mil thickness
Paint Industrial enamel, high solids, 4 mil thickness

For further compactor, baler, and drum crusher information, please call or fax us at the numbers below.
FREE Quotes! Click here